國產產品特點

  本系列脫模劑為銀白色懸浮液，采用原料復配而成，揮發速度快、功效高、涂膜薄且均勻附著力強，噴刷一一次可重復使用多次。

適用範圍

  本系列產品適用于木模、塑料模、金屬模等模樣和芯盒，適用于水玻璃砂、樹脂砂、油砂等砂型(芯)。

  1．使用請充分震蕩，搖勻直接使用原液即可。

  2．用溶劑或毛刷將模型(芯盒)上樹脂及殘渣清理干凈。

  3．用噴(刷)的方法將產品均勻涂到模具上，芯盒，外表不要堆疊太厚，以防妨礙砂芯尺寸精度

  4.等涂面干亢后(2分鐘左右)即可添砂造型。

注重事項

  1．本產品為工業易燃品，使用時注重防火且遠離火源。

  2．當沾上皮膚，應馬上用清水沖洗。

  3．屬揮發性產品，應存放陰涼通風處，且密封保存。

Characteristics：

   This series of release agent for silvery—white suspension，the use of high—quality raw materials frOm the compound，volatile fast，high efficiency，thin film and unifOrm，strong adhesion，spray

brush can be reused many times．

Scope of application：

   This series of products apply to wood mold，plastic moldl metal mold，such as the core box|applicable to water glass sand，resin sand，oil sands sand type(CORE)．

1．Use please full shock，shake evenly directly using the original liquid can

2．To clean up the resin and residue of the model(core box)with a solution or a brush

3．Spray or brush the product evenly to the mold，the core box，the surface does not accumulate too thick，to prevent the impact of sand core dimension accuracy

4．After drying(2 minutes or so)，you can fill sand molding

Attention matters：

1．This product is industrial flammable products．the use of attention to fire and away from the ignition

2．When stained with skin，rinse immediately with water

3．It is a volatile product，should be stored in a cool and ventilated place，anis a volatile product，

should be stored in a cool and ventilated place．and sealed to savesealed to save