國產產品特點

   濕砂型脫模劑適用于鑄造濕砂造型線機器造型及手工造型方法。要緊用于濕砂造型的脫膜(離型)是以水為疏散介質，不含任何有毒有害物質，提高模具與型砂之間的割裂性。本產品疏散性好，易噴涂，使用便宜，脫模力��；耐氣候性好，存儲性能穩定；對模具外表無腐蝕，無結垢現象，便于清洗

性能特點    

   1．脫模性能優越。

   2．在一般條件下，一次涂抹后，連續數次造型有效。

   3．具有防銹功能，可延長模型使用壽命。

   4，操作安全，系非危險品。

   5，均勻滑溜，成膜性好。

國產產品型號

   XF-001 XF-002

◆注重事項

1．注重噴涂脫模劑的角度，噴涂量。夏季預防陽光直射，冬季注重防凍。

2．前期使用，好是每次都噴塗，待模型發亮以後，可隔1—2次噴塗1次，若相隔次數太多，會對以後的造型不順：

3．若不慎沾上皮膚或誤入眼內時，應馬上用清水沖洗幹淨。

Characteristics：

  The wet sand mold release agent is suitable for the moulding and the manual moulding method of the casting wet sand moulding line．Mainly used in the wet sand model of the film(off)，is the water

as a dispersed medium，does not contain any toxic and harmful substances，improve the separation between mold and molding sand．This product has good dispersibility，easy spraying，easy to use， good resistance to climatef stable storage performance|no corrosion on the mold surface|no scaling phenomenon，easy to clean．

Performance features：

  1．Excellent demoulding performance

  2．GenerallY conditions，after one smear，the continuous number of times the shape is effective

  3．It can prolong the service life of the model with antirust function

  4．Safe to operate，non—toxic，is not dangerous goods

  5．Uniform smooth，good f．1m forminq

  Product model：XF．．001 XF．．002

  Attention matters：

    1．Pay attention to spraying release agent angle，spraying quantity．Summer to prevent direct sunlight．Winter attention antifreeze

    2．Initial use，preferably every time spraying，after the model is shiny，you can spray 1 times after 1—2 times，if too many times apart，w…be unfavorable to the shape later

    3．If the skin is accidentally stained or mistakenly in the eye，rinse clean with water immediately